Hydro Jetting in Longmont, CO
Snaking punches a hole through a clog. Hydro jetting scours the full width of the pipe, which is the real difference when the same drain keeps backing up.
Hydro jetting uses a high-pressure water stream, delivered through a specialized nozzle on a flexible hose, to scour the full interior diameter of a drain or sewer line. That's a meaningfully different result than snaking, which typically breaks a path through the middle of a clog rather than clearing the pipe wall itself.
This matters most for grease buildup in a kitchen or main line and for a drain that's been snaked repeatedly without the clog staying gone, since both usually mean material is still coating the inside of the pipe even after the immediate blockage clears.
Same Drain Keeps Clogging Even After It's Been Snaked?
A drain that clears after snaking and then backs up again within weeks is one of the most common reasons homeowners end up here, usually without ever having heard the term hydro jetting first. The recurrence is the real signal: it means the clog was cleared but the buildup lining the pipe wasn't, and it will keep collecting the same way until the pipe itself is actually scoured clean.
When Hydro Jetting Is the Right Call
- The same drain has clogged more than once despite being snaked.
- A kitchen line is affected by ongoing grease buildup.
- A main sewer line clog keeps recurring even after clearing.
- A camera inspection shows heavy buildup coating the pipe walls, not just an isolated blockage.
- Multiple fixtures drain slowly across the whole house, suggesting a main line issue rather than one clogged fixture.
Why Recurring Clogs Happen in Longmont
Longmont's hard water narrows pipe diameter over time through mineral scale, which gives grease and debris less room to pass and more surface area to stick to. A line that would handle typical debris fine in a soft-water market has genuinely less margin here.
Mature trees in established Longmont neighborhoods also mean root intrusion is a real, recurring contributor to main line clogs, and jetting is often paired with a camera inspection specifically to confirm whether roots are involved before or after clearing the line.
How We Decide Jetting Is the Right Approach
A camera inspection typically comes first, since jetting isn't the right tool for every pipe condition. A line with a structural crack or a collapsed section needs that damage addressed before jetting, not instead of it, since high-pressure water against already-compromised pipe risks making things worse.
Once the line's structural condition is confirmed sound, the jetting hose is fed through with a nozzle matched to the pipe diameter and the type of buildup, whether that's grease, scale, or root intrusion debris.
Jetting and What Comes After
- Standard hydro jettingClears grease, scale, and debris buildup along the full pipe wall, resolving recurring clogs that snaking alone hasn't fixed.
- Jetting plus camera inspectionConfirms the line is actually clear afterward and documents condition, especially valuable after root intrusion.
- Repair or replacement firstNecessary before jetting if the camera finds a structural issue like a crack or collapsed section that jetting could worsen.
What Hydro Jetting Costs
Pricing depends on line length, the type of buildup, and whether a camera inspection is needed alongside it.
- Line length and diameterA longer main line takes more time to fully jet than a single fixture drain.
- Buildup typeHeavy grease or root intrusion debris takes longer to clear than routine scale.
- Camera inspectionOften recommended alongside jetting, which adds to the visit but confirms the result.
- AccessAn accessible cleanout speeds up the job compared to needing another access method.
Free estimates for non-emergency hydro jetting. Call (303) 552-3896 for your real number.
Frequently Asked Questions
Is hydro jetting safe for older pipes?
It depends on the pipe's actual condition, which is why a camera inspection typically comes first. Sound older pipe handles jetting fine, but a already-cracked or collapsed section needs repair first.
How is hydro jetting different from snaking?
Snaking breaks a path through a clog. Jetting scours the full interior diameter of the pipe, which is why it holds up better against recurring buildup.
Will hydro jetting damage my pipes?
When the line's condition has been confirmed sound first, jetting is a standard, safe method. It's only a risk on pipe that's already structurally compromised, which is exactly what the camera inspection rules out beforehand.
Do you offer hydro jetting for main sewer lines specifically?
Yes, main line grease and root-intrusion debris are among the most common reasons for jetting here.